Application:
SBW-F Series Adjustable three phase full-automatic compensated power voltage stabilizer is a new design voltage stabilizer improved based at SBW series products, the only difference with SWB series.this type used three motor control and three electronics PCB board control systems.also is three sets of single-phase voltage stabilizer by"star-shaped" connection. Professional suitable for unbalanced input three-phase voltage.can keep output automatically balance, and keep the merits of a steady voltage regulator. With the function of three phase independently voltage-stabilizing, it applies to the unbalanced input voltage of three phases or unbalanced three phase loads. Moreover, it has the functions such as voltage regulating stability,high voltage stabilizing precision, and autobalance of three phases. The regulating voltage parts of this series voltage stabilizer is adopted the pillar. There fore, it has more power and more reliability.
Service Occasions:
Widely used in electromechanical equipment,metal processing equipment,production line.construction device.excvavtor for gold mine,post and telecommunications,department stores,elevators.hospitals equipment.schools.printing machine.securities and other occasions where all need normally voltage to ensure,such as workshop mines medium enterprises.some of the important equipement and computer power and support where need voltage stabilization.
Spec.:
|
Input Voltage Range |
Three phase four wire,300V-460V or 266V-495V.pls indicate when placing order |
|
Phase Number |
Three Phase Four Wire |
|
Frequency |
50/60Hz |
|
Output Voltage |
Three phase four wire,phase voltage 220V,wire voltage 380V,singe-phase voltage 220V |
|
Output Precsion |
380V±3%，220V±2%，2-5% adjustable |
|
Response Time |
<1.5sec.against 10% input voltage deviation |
|
Efficiency AC-AC |
>98% other we can do according to customer requirement such as 80% |
|
Power Factor Cost |
0.8 |
|
Waveform Distortion |
Non-lack fidelity waveform, Sine Wave |
|
Insulation Resistance |
>2MΩ |
|
Over-load capability |
2 times rated current,keeping 1minuter(voltage stabilizer special for elevator and CT and servo-motor and water pump) |
|
Electric Strength |
Bear power frequency sine voltage 2000V for 1 Minute without breakdown or flash over. |
|
Auto/Manual |
Power on can be choice inside build knife switch and AC contactor |
|
Protection Function |
Over-Voltage,under-voltage.Over-load(over-current), Short Circuit,Delay time choice,surge protect,EMI,phase-sequency and phase fail and phase UN-balance protection and machical fault., |
|
Ambient Temperature |
-10℃+45℃ |
|
Relative Humidity |
>90% |
Packing information:
|
Model |
Output Max Current(A) |
Products Dimension(cm) |
Net Weight(kg) |
|
SBW-F-30kVA |
45 |
110×85×137 |
450 |
|
SBW-F-50kVA |
76 |
110×85×137 |
500 |
|
SBW-F-60kVA |
91 |
110×85×137 |
530 |
|
SBW-F-80kVA |
121 |
115×90×200 |
600 |
|
SBW-F-100kVA |
152 |
115×90×200 |
650 |
|
SBW-F-120kVA |
182 |
115×90×200 |
680 |
|
SBW-F-150kVA |
227 |
120×100×185 |
700 |
|
SBW-F-180kVA |
273 |
120×100×185 |
800 |
|
SBW-F-200kVA |
303 |
125×100×195 |
850 |
|
SBW-F-225kVA |
342 |
125×100×195 |
900 |
|
SBW-F-250kVA |
379 |
125×100×195 |
920 |
|
SBW-F-300kVA |
455 |
125×100×195 |
980 |
|
SBW-F-320kVA |
485 |
125×100×195 |
1000 |
|
SBW-F-350kVA |
530 |
150×85×200 |
1010 |
|
SBW-F-400kVA |
606 |
150×85×200 |
1030 |
|
SBW-F-500kVA |
758 |
100×80×200/2 Case |
1510 |
|
SBW-F-600kVA |
909 |
100×80×200/2 Case |
1700 |
|
SBW-F-800kVA |
1212 |
100×80×200/3 Case |
2750 |
|
SBW-F-1000kVA |
1515 |
100×80×200/3 Case |
3050 |
|
SBW-F-1200kVA |
1818 |
100×80×200/4 Case |
3650 |
|
SBW-F-1600kVA |
2424 |
100×80×200/4 Case |
5100 |
|
SBW-F-1800kVA |
2727 |
100×80×200/4 Case |
5500 |
|
SBW-F-2000kVA |
3030 |
100×80×200/4 Case |
5800 |
|
